基于DRGAN和支持向量机的合成孔径雷达图像目标识别

为解决SAR图像目标识别中样本缺乏和方位角敏感问题,提出了一种基于DRGAN和SVM的SAR图像目标识别算法。首先,采用多尺度分形特征对SAR图像进行增强,经过分割得到目标二值图像,基于Hu二阶矩估计目标的方位角。然后对估计得到的目标方位角进行量化编码,结合原始图像作为输入,对设计的DRGAN模型参数进行训练与优化。由于DRGAN中的深度生成模型将目标姿态与外观表示进行解耦设计,故可利用该模型将SAR图像样本变换到同一方位角区间。基于变换后的训练样本分别提取归一化灰度特征,利用SVM训练分类器。采用MSTAR数据集在多个不同操作条件下对提出的算法进行测试,实验结果表明,在带变体的标准操作条件下,能够达到97.97%的分类精度,优于部分基于CNN模型的分类精度,在4种扩展操作条件下的分类精度分别为97.83%,91.77%,97.11%和97.04%,均优于传统方法的分类精度。在SAR图像目标方位角估计存在一定误差的情况下,训练得到的GAN模型作为SAR图像目标旋转估计器,能够使得在不进行复杂样本预处理的前提下,仍然取得较高的SAR图像目标识别精度。     

Heat transfer inside a horizontal channel with an open trapezoidal enclosure subjected to a heat source of different lengths

The heat transfer phenomena inside a horizontal channel with an open trapezoidal enclosure subjected to a heat source of different lengths was investigated numerically in the present work. The heat source is considered as a local heating element of varying length, which is embedded at the bottom wall of the enclosure and maintained at a constant temperature. The air flow enters the channel horizontally at a constant cold temperature and a fixed velocity. The other walls of the enclosure and the channel are kept thermally insulated. The flow is assumed laminar, incompressible, and two‐dimensional, whereas the fluid is considered Newtonian. The results are presented in the form of the contours of velocity, isotherms, and Nusselt numbers profiles for various values of the dimensionless heat source lengths (0.16 ≤ ε ≤ 1). while, both Prandtl and Reynolds numbers are kept constant at (Pr = 0.71) and (Re = 100), respectively. The results indicated that the distribution of the isotherms depends significantly on the length of the heat source. Also, it was noted that both the local and the average Nusselt numbers increase as the local heat source length increases. Moreover, the maximum temperature is located near the heat source location.     

自然循环窄矩形通道内过冷沸腾两相摩擦阻力特性

采用去离子水作为实验工质，在低压低流速自然循环工况下开展了单面加热可视化窄矩形通道内的过冷沸腾摩擦阻力特性实验研究。实验中测量了实验段内的压降数据，并通过高速摄影仪拍摄了窄矩形通道内的气液两相图像，提出了过冷沸腾条件下的两相摩擦压降的剥离计算方法。基于本实验中获得摩擦压降数据，对分别基于均相流模型和分液相模型的经典两相摩擦压降计算关系式进行了评估，实验结果表明：采用不同等效黏度计算方法的均相流模型计算结果比实验值明显偏小；而分相流模型中，Sun and Mishiba关系式和Tran关系式均能够较好地预测摩擦阻力，计算值与实验值的平均相对偏差在±15%以内。结合实验数据，以分相流模型方法为基础，考虑全液相Reynolds数、Martinelli参数和Laplace数的影响，获得了计算分液相折算系数的经验关系式，与实验数据符合较好, 平均相对误差在10%范围内。     

Maximum likelihood-based adaptive differential evolution identification algorithm for multivariable systems in the state-space form

Parameter estimation plays an important role in the field of system control. This article is concerned with the parameter estimation methods for multivariable systems in the state-space form. For the sake of solving the identification complexity caused by a large number of parameters in multivariable systems, we decompose the original multivariable system into some subsystems containing fewer parameters and study identification algorithms to estimate the parameters of each subsystem. By taking the maximum likelihood criterion function as the fitness function of the differential evolution algorithm, we present a maximum likelihood-based differential evolution (ML-DE) algorithm for parameter estimation. To improve the parameter estimation accuracy, we introduce the adaptive mutation factor and the adaptive crossover factor into the ML-DE algorithm and propose a maximum likelihood-based adaptive differential evolution algorithm. The simulation study indicates the efficiency of the proposed algorithms.     

宽带数字接收机IQ不平衡估计与自适应补偿算法

针对宽带调制解调技术中广泛存在的IQ不平衡问题,在IQ不平衡模型及补偿原理的分析基础上提出了一种宽带数字接收机IQ不平衡估计与自适应补偿算法。首先利用解调数据对IQ不平衡参数进行实时估计,然后利用估计参数对接收信号进行自适应补偿。实验结果表明,所提算法可以有效解决宽带调制解调系统中普遍存在的IQ不平衡问题,提升系统误码性能。     

关于硬件木马电路检测技术分析及发展趋势探讨

本文结合HTH电路的复杂性等特征分析与实际应用现状,研究了HTH电路的具体检测技术方法并对当前热点技术进行对比分析,探讨了HTH电路检测方法的技术发展趋势。     

Estimating epidemic coupling between populations from the time to invasion

Identifying the mechanisms by which diseases spread among populations is important for understanding and forecasting patterns of epidemics and pandemics. Estimating transmission coupling among populations is challenging because transmission events are difficult to observe in practice, and connectivity among populations is often obscured by local disease dynamics. We consider the common situation in which an epidemic is seeded in one population and later spreads to a second population. We present a method for estimating transmission coupling between the two populations, assuming they can be modelled as susceptible–infected–removed (SIR) systems. We show that the strength of coupling between the two populations can be estimated from the time taken for the disease to invade the second population. Confidence in the estimate is low if only a single invasion event has been observed, but is substantially improved if numerous independent invasion events are observed. Our analysis of this simplest, idealized scenario represents a first step toward developing and verifying methods for estimating epidemic coupling among populations in an ever-more-connected global human population.     

F-OFDM仿真系统设计与时频同步算法

针对新一代5G波形的F-OFDM技术开展了研究,通过把一个宽带分为若干个子带,对每个子带进行滤波处理以实现更好的通信效能。基于Simulink平台进行了F-OFDM仿真系统的搭建,重点对F-OFDM符号同步方法和频偏估计方法进行了研究与仿真分析。实验结果表明,基于Chu序列相比采用PN序列可以获得更好的同步效果,基于导频的Classen频偏估计算法相比基于CP的CFO估计算法和基于训练序列的Moose估计方法可以获得更好的频偏估计效果。     

Clustering biomedical and gene expression datasets with kernel density and unique neighborhood set based vein detection

It is a crucial need for a clustering technique to produce high-quality clusters from biomedical and gene expression datasets without requiring any user inputs. Therefore, in this paper we present a clustering technique called KUVClust that produces high-quality clusters when applied on biomedical and gene expression datasets without requiring any user inputs. The KUVClust algorithm uses three concepts namely multivariate kernel density estimation, unique closest neighborhood set and vein-based clustering. Although these concepts are known in the literature, KUVClust combines the concepts in a novel manner to achieve high-quality clustering results. The performance of KUVClust is compared with established clustering techniques on real-world biomedical and gene expression datasets. The comparisons were evaluated in terms of three criteria (purity, entropy, and sum of squared error (SSE)). Experimental results demonstrated the superiority of the proposed technique over the existing techniques for clustering both the low dimensional biomedical and high dimensional gene expressions datasets used in the experiments.     

Application of LSPIV to measure supercritical flow in steep channels with low relative submergence

Measuring flow discharge has always been one of the most important concerns of water experts. To measure discharge in streams using velocity-area method it is necessary to quantify average velocity of the flow. It is not feasible to measure velocity by contact approaches like current meters under certain conditions such as in flood periods or for very shallow flows. Flow surface image velocimetry methods as non-intrusive solutions have recently been widely utilized to measure discharge in open channels. One of these methods is a variety of PIV method named LSPIV which has been very popular due to the elimination of laser application. In this study, LSPIV was used to measure 2D velocity field over the surface of steep supercritical flow. The obtained surface velocity data were used to calculate Velocity Index (VI) which is multiplied by surface velocity to convert it to mean velocity and subsequently flow discharge. Also, a few relations were proposed to calculate the VI according to the slope and relative submergence. Since, Velocity Index has been so far mostly studied for subcritical conditions, results of this study may be applied for measuring supercritical flows. Eventually, the proposed method was verified to be used for discharge measurement and was proven quite precise in this regard.